710310 – FILTER ASSY,SALT SOL.IN-LINE-YELLOW – Works with all Harshaw, Engelhard, Atotech USA, Atlas and Auto Technology Company fog and cyclic corrosion test chambers. PURPOSE: The purpose of the Solution Filter Assembly is to prevent solid particles from clogging the atomizer nozzle. LOCATION: The Solution Filter Assembly is attached to the solution reservoir behind the cover panel. FUNCTION: The solution filter prevents any solid particles that may be in the solution reservoir from arriving at, and potentially clogging, the solenoids and atomizer nozzle. To replace the filter; 1. Turn off the pump if on, 2. relieve solution pressure, 3. remove the old filter from the quick connect fittings, 4. Cut the new filter tubing to size to match the old filter assembly, 5. put the new filter inline and attach to the quick connect fittings. CAUTION; pay careful attention to the direction of flow of the solution. The filter has an arrow showing direction of flow. Also, take care in installing the filter, if too much pressure is applied to the plastic nipples that the tubing attaches to on either side of the filter, these nipples can crack, or break off. The housing of our filter assembly changed in the summer of 2017. The discontinued part was a clear acrylic material, and the replacement part is a white acetal material. Additionally, the flow direction has changed, which is noted by the arrow on the housing. This should be checked every time this part is repalced, though. The part functions the same, however we wanted to let you know that the part design has changed.
|7 × 7 × 12 in