720880 – REGULATOR, PANEL MOUNT, W/NUT NC

Description

720880 – REGULATOR, PANEL MOUNT, W/NUT NC – Works with all Harshaw, Engelhard, Atotech USA, Atlas and Auto Technology Company fog and cyclic corrosion test chambers.    PURPOSE:  The purpose of Bubble Tower Pressure Regulator is to adjust the amount of air entering the bubble tower,  thus regulating the pressure of the air leaving the bubble tower. Normally, the bubble tower is operated at  15psi / 100 kilopascals.  LOCATION:  The pressure regulator is located on the right side of the controls cabinet.    FUNCTION:  When solenoid #5 (air to bubble tower regulator) is activated, or turned ON, compressed air enters the  inlet of the bubble tower air regulator and is routed through the regulator, through the bubble tower and to  the bubble tower pressure gauge. To regulate the air, pull up (out) on the regulator knob and turn  clockwise or counter-clockwise. When the pressure is set to the desired level, push down (in) on the  regulator knob to lock in the pressure setting.