C100341-A – DISPER. TOWER ASSEM. ATO FILL 23,24

Description

C100341-A – DISPER. TOWER ASSEM. ATO FILL 23,24 – The purpose of the dispersion tower assembly is to create corrosive fog. There are two basic types of dispersion towers, vertical and horizontal. The difference is that the vertical tower has an inverted cone on the top of it, and the horizontal has a Tee on top of the tower with two dispersion pipes attached to it. The cabinet controller fills the internal reservoir with solution from the 55-gallon mix and storage tank using the plastic solution solenoid. Once full, the bubble tower air solenoid activates allowing compressed air into the bottom of the bubble tower. The compressed air travels through the bubble tower and exits the top of the tower and then into the side of the atomizer nozzle. When this bubble tower conditioned air enters the side of the atomizer nozzle, it creates a siphon and draws solution up and into the atomizer nozzle. The air and solution mix inside the atomizer nozzle to create a fine fog. The level switch controls the solution level in the tower during fog cycles. The inverted cone at the top of the assembly baffles the fog into an even mist for proper fog distribution. Works with all Harshaw, Engelhard, Atotech USA, Atlas and Auto Technology Company fog and cyclic corrosion test chambers.