C212641 – SOLENOID 2 WAY PLASTIC VALVE
C212641 – SOLENOID 2 WAY PLASTIC VALVE – The cord for this solenoid is NOT included. Please purchase the cord seprately, Part Number: 720060. The purpose of the salt solution solenoid is to allow salt water to travel into the dispersion tower internal reservoir from the external 55-gallon mixing tank. This solenoid is normally closed, stopping the flow of solution through it. When the internal reservoir float switch (C263290 Float switch, normally open) reads a low condition, this solenoid will open. When open, solution in the 55-gallon mix/storage tank will gravity feed through the solenoid and into the internal reservoir. Once the float switch inside the internal reservoir reads a full condition, this solenoid closes, stopping the flow of solution. NOTE: this solenoid is rated for low pressure, and high-pressure lines should never be connected to it. Works with all Harshaw, Engelhard, Atotech USA, Atlas and Auto Technology Company fog and cyclic corrosion test chambers.
|Dimensions||7 × 7 × 7 in|